一張生成的標題卡寫著 Qwen4-Max vs GPT-6.2 Sol,副標題為「一半的 token 價格,三倍的任務量」,並有三個標籤分別寫著每 1M 輸出 $4.50 對比 $10.00、每項任務成本 $3.27 對比 $1.01,以及指數 v5.0.1 43 對比 57。
Guides & Insights

Qwen4-Max 對決 GPT-6.2 Sol:Token 價格只要一半,任務量卻有三倍

作者

jinhao.song

發佈日期

最新模型 · 20查看全部模型 →
基準測試:Artificial Analysis · 每日更新
返回全部文章

GPT-6.2 Sol 每百萬輸入 token 收費 2.00 美元,每百萬輸出 token 收費 10.00 美元。Qwen4-Max 則為 1.50 美元與 4.50 美元。在價目表上,較便宜的模型是 Qwen4-Max,而且差距相當明顯——輸入便宜 25%,輸出便宜 55%。但在唯一近似帳單的衡量方式上,Artificial Analysis 指出,完成一項 Intelligence Index 任務在 GPT-6.2 Sol 上花費 1.01 美元,在 Qwen4-Max 上則花費 3.27 美元。每 token 收費超過兩倍的模型,完成同一項工作的花費卻不到三分之一的錢。

That inversion has one cause, and it is not a pricing trick: GPT-6.2 Sol, which O​penAI shipped on 17 November 2026 at exactly the price of the model it replaces, generates 60.9 million output tokens to complete the nine-evaluation suite. Qwen4-Max, generally available since 16 November, generates 127 million — more than double, against a field median of 65.1 million. Everything else in this comparison follows from those two numbers.

A screenshot of the Artificial Analysis page for GPT-6.2 Sol captured 18 November 2026 with an English interface, showing the OpenAI provider tag, an Intelligence Index score of 57, $2.00 input and $10.00 output per million tokens, $1.01 per task, 60.9M output tokens, 85 tok/s, 7.9 minutes per task and a 68.2-second time to first answer token.

兩張形狀不同的卡片,不只是數字不同

在逐項任務的數字之前,先講費率結構,因為這兩張卡失效的方式不同。Sol 販售一個便宜的層級和一個昂貴的層級;Qwen4-Max 則從零到上下文上限只販售一個層級。

• 輸入 — GPT-6.2 Sol 每百萬個 token 2.00 美元,最多適用於 272,000 個 token;超過此用量則為每百萬個 token 4.00 美元。Qwen4-Max 在新加坡為均一價 1.50 美元,在全球範疇區域為 1.413 美元,無論是 200,000 個 token 還是 900,000 個 token 皆相同。

• 輸出 — Sol $10.00(最高至 272,000),超過為 $15.00。Qwen4-Max $4.50,均一價。

• 快取輸入 — Sol 每百萬 $0.10;Qwen4-Max 在其他地區為 $0.071,在新加坡為 $0.075。Sol 的快取寫入在短上下文 Standard 請求中,30 分鐘視窗為 $2.50,12 小時為 $5.00;Qwen4-Max 公布 5 分鐘寫入為 $1.875,一小時為 $3.00。

• 上下文 — Sol 具備 1,050,000 個 token,最大輸入為 922,000 個 token;Qwen4-Max 為 1,000,000 個 token,在思考模式下輸入上限為 983,616 個 token,關閉思考時則為 991,808 個 token。

• 輸出上限 — Sol 固定為 128,000;Qwen4-Max 非思考模式為 131,072,或由推理與答案共用 262,144。

• 模態 — Sol 接受文字、圖像與檔案。Qwen4-Max 接受文字、圖像與影片。兩者皆僅輸出文字。

• 推理控制 — Sol 提供五個投入等級,從 low 到 max,預設為 medium,且始終開啟。Qwen4-Max 提供三個等級:low、high 與 xhigh,預設為 high,並接受 temperature、top_p 與 top_k,而 Sol 會拒絕這些參數。

• Knowledge cutoff — 1 June 2026 on GPT-6.2 Sol. A​libaba has not published one for Qwen4-Max, which is itself a row worth noticing: a model sold on document and video understanding with no stated cutoff is a model you test rather than assume.

272,000 token 邊界是該清單中對提示詞規模龐大者影響最大的一個數字。低於此邊界時,在 Sol 上一百萬個輸入 token 的費用為 $2.00,一百萬個輸出 token 為 $10.00。達到或超過此邊界時,整個請求按輸入 $4.00、輸出 $15.00 計費——輸入翻倍,輸出增加 50%——快取費率也隨之翻倍。一份 400,000 token 的文件審閱,在任何人寫下任何一個字之前,於 Sol 上的輸入成本為 $1.60,於 Qwen4-Max 上為 $0.60。

A generated two-column scoreboard titled Qwen4-Max vs GPT-6.2 Sol - the scoreboard, with six rows reading index 43 against 57, cost per task $3.27 against $1.01, input price $1.50 flat against $2.00 to 272k, output price $4.50 flat against $10.00 to 272k, time per task 32.1 against 7.9 minutes, and output tokens 127M against 60.9M.

「努力程度」旋鈕對帳單金額的影響,比價格本身更大。

Sol 出貨時推理始終開啟,投入程度預設為中等。Qwen4-Max 出貨時推理開啟,投入程度預設為高,而思考預算本身預設為 131,072 個 token。這兩者的預設設定都所費不貲,且兩者都不是 Artificial Analysis 評測計分時所採用的設定。

追蹤器在 Sol 的最大努力設定,以及 Qwen4-Max 旋鈕的最高檔位進行測量,回報其中一方的輸出 token 為 60.9M,另一方為 127M。做個簡單乘法——1.27 億輸出 token 以 $4.50 計,對上 6,090 萬以 $10.00 計——Qwen4-Max 的輸出成本是 $572,Sol 則是 $609。兩邊相差兩美元。公布的每任務數字是 $3.27 和 $1.01,反方向出現 3.2 倍差距,這意味著每任務數字是九項評測中輸入、快取輸入、推理與答案 token 的加權混合,而不是輸出數量的倍數。這兩個數字都是測量值;你能從費率卡算出來的算術,並不是產生這些數字的算術,任何聲稱能從其中一個推導出另一個的評論,都只是在猜。

What the effort detail does tell you is where a team can move its own bill. Dropping Qwen4-Max from high to low effort, or capping its thinking budget below the 131,072 default, cuts the reasoning-token count that drives most of its verbosity. Dropping Sol from max to medium does the same on O​penAI's side. A comparison run entirely at each vendor's default is a different comparison from the one on the leaderboard, and it is the one your application will actually produce.

速度列,這並不接近

冗長除了成本之外還有第二個後果,而這個後果沒有任何變通辦法。

• 每項索引任務耗時 — GPT-6.2 Sol 7.9 分鐘,Qwen4-Max 32.1 分鐘,中位數為 11.5。追蹤器將 Sol 描述為快於平均;Qwen4-Max 則明顯偏慢。

• 輸出速度 — 每秒 85.1 個 token,相較於 54.5。

• 首個答案 token 的耗時——68.2 秒對比 155.4 秒。這兩個數字都包含推理,因此兩者都無法與聊天產品所宣稱的不到一秒首個 token 數字相比。

任務完成時間出現四倍差距,是產品決策,不是調校參數。對於每次請求會發出二十次工具呼叫的代理而言,32 分鐘對上 8 分鐘,就是背景作業與互動式作業之間的差別。如果你的工作負載是批次處理,這個差距只會讓你損失吞吐量,別無其他代價。如果它是在使用者面前運行,Qwen4-Max 唯一誠實的辯解,就是把它路由到延遲不重要的任務;這是路由決策,而非模型選擇。

每 token 成本較低的模型真正勝出的地方

有三行偏向 Qwen4-Max,而其中沒有一項與智能有關;在同一 v5.0.1 修訂版上,Sol 以 57 比 43 領先——十四分,大約是一個半等級。

第一段是長上下文。任何超過 272,000 個輸入 token 的請求,都會讓 Sol 進入較高的價位層級,而 Qwen4-Max 則維持不變。在 400,000 個輸入 token、8,000 個輸出 token 的情況下,Sol 收費 1.60 美元加 0.12 美元,也就是 1.72 美元;Qwen4-Max 收費 0.60 美元加 0.036 美元,也就是 0.64 美元。這是有利於 Qwen4-Max 的 2.7 倍差距,而這正好與主要輸出價格比較的結果相反。長上下文工作是 Qwen4-Max 這張卡明顯更划算的唯一一種工作負載,而這也正是兩款模型所主打的工作負載——雙方都提供 1M 視窗。

第二項是影片。Sol 不接受影片。Qwen4-Max 則接受,且費率與文字相同,這使得螢幕錄影篩選、行車記錄器檢視與產品示範分析,無論價格高低,都成為非 Qwen 不可的工作負載。

第三點是思考模式下的輸出餘裕。Sol 的 128,000-token 輸出上限固定不變;Qwen4-Max 則讓單次回應可承載 262,144 個 token,並分配於推理與答案之間,這對長解碼任務很重要,因為 Sol 的上限會造成截斷。非思考模式的 131,072 這個數字,才是要與 Sol 的 128,000 相比的數字;而在該項上,兩者水準相差在 3% 以內。

在實際可遷移的那一側,遷移成本是什麼

Neither model is a drop-in for the other, and the asymmetry is worth stating plainly. Qwen4-Max documents four protocol surfaces — O​penAI Chat Completions, O​penAI Responses, A​nthropic Messages and DashScope — with structured output, parallel tool calling, prefix completion and implicit caching. Sol documents Chat Completions, Responses and Batch, with tool calling requiring the Responses API, and it rejects sampling parameters outright: omit temperature, top_p and logprobs from Chat Completions requests.

O​penAI's own GPT-6.2 migration guide adds a quieter hazard: starting with 6.2, the API drops reasoning items when it detects a mid-conversation change to the history — a prefix edit, a model downgrade, an end-user change. Lose those items and answer quality can decline while the token count rises, with no error to catch. A team that replays a conversation under a different end-user ID for evaluation will see slightly worse answers and a larger bill, which is the hardest class of regression to attribute.

這正是在真實流量上測試遷移、而非只做煙霧測試的理由,也是備援路徑之所以重要的同一個原因。如果這次推行最後證明是錯誤的決定,只有在舊模型仍可透過同一組金鑰與端點存取時,回退才會成本低廉。

一把鑰匙,以及這兩者中哪一個在它上面

OrcaRouter routes GPT-6.1 Sol, not GPT-6.2 Sol: the catalogue carries openai/gpt-6.1-sol at O​penAI's list price with 0% markup passed through, alongside the GPT-6 Astra and Luna entries, and it does not yet carry the 6.2 Sol identifier. Qwen4-Max is not hosted here either — it is available through A​libaba's own Model Studio API and several third-party platforms.

A screenshot of the OrcaRouter model page for openai/gpt-6.1-sol captured 18 November 2026 with an English interface, showing the OpenAI breadcrumb, the openai/gpt-6.1-sol identifier, text, image and file input with vision, tools, JSON and reasoning, a 128k max output, and a description placing it one tier below GPT-6 Astra.

因此,對想要據此採取行動的團隊來說,這項比較的實用形式是兩階段測試,而不是直接替換。第一階段:用你自己的提示詞,分別測試 GPT-6.1 Sol 與 Qwen 級模型;前者在這裡只需一把金鑰,且是 6.2 以相同主要費率取代的模型,後者則用於長上下文與影片案例。第二階段:當 6.2 識別碼上線時,把路由 DSL 中 Sol 那一側切換過去,並讓自動容錯移轉在你觀察每項任務成本、而非每 token 成本時,維持舊路徑開放。

這就是本文中的數字整體上所主張的紀律。一個團隊若以 $1.50 對 $2.00、$4.50 對 $10.00 來比較這兩者,會得出 Qwen4-Max 是經濟實惠選擇的結論,卻會在帳單上差了三倍。一個團隊若以 $3.27 對 $1.01 來比較它們,成本會算對,但仍可能選錯,因為十四個指數點和 4× 延遲差距,才是決定該工作負載究竟是否可行的關鍵列。唯一值得做的比較,是每項任務成本對照你自己的延遲需求,而兩家廠商的費率表都不會給你這兩個數字中的任何一個。

本文中的比較2

根據本文內容識別 · 基準測試:Artificial Analysis · 每日更新