Thẻ tiêu đề được tạo có nội dung 'Tencent Hy4 vs Kimi K3.1 Pro', với hai cột số liệu: Hy4 đạt Chỉ số Trí tuệ 34.6, tổng cộng 770B tham số và 49B tham số hoạt động, $0.834/$2.501 mỗi triệu token; Kimi K3.1 Pro đạt 46.5, tổng cộng 2.8T tham số và 104B tham số hoạt động, $2.00/$10.00; và phần chân trang ghi 'Chỉ số theo Artificial Analysis v5.0.1, truy cập ngày 20 tháng 11 năm 2026; trọng số của cả hai mô hình đều được công khai.'
Guides & Insights

Hy4 so với Kimi K3.1 Pro: Cả hai đều có thể tải xuống, nhưng chỉ một có thể tự host

Tác giả

Alistair Wren

Ngày đăng

Mô hình mới nhất · 20Xem tất cả mô hình →
Benchmark: Artificial Analysis · cập nhật hằng ngày
Quay lại tất cả bài viết

Kimi K3.1 Pro scores 46.5 on the Artificial Analysis Intelligence Index. T​encent Hy4 scores 34.6. That is a 12-point gap, and it is the largest deficit Hy4 runs in any matchup this week — larger than the one against Qwen4-Max, more than ten times the one against Grok 4.7. On the board, Kimi K3.1 Pro is the best open-weight model listed, first of 32 in its class.

Then you look at what the two weigh. Kimi K3.1 Pro is a 2.78-trillion-parameter model with 104 billion active per token. T​encent Hy4 is 774 billion total with 49 billion active. Both were published as downloadable weights — K​imi's on 2 November 2026, Hy4's on 18 November, three weeks apart. Only one of them fits on a machine a normal company owns, and that single fact reorganises the entire comparison. This is not a story about which model is smarter. It is a story about which model you can actually run, and what the smarter one costs you per completed task if you rent it instead.

Thước đo duy nhất quyết định điều này

Dấu chân triển khai tối thiểu, ở độ chính xác do chính nhà cung cấp khuyến nghị:

• T​encent Hy4 — 774 billion parameters in BF16, published as 245 shards of roughly 12.9 GB and 6.4 GB, about 1.45 TB before any quantisation. T​encent's own serving recipe uses tensor parallelism of 8 on a single node's worth of GPUs with the FP8 build, which is roughly 786 GB of weights.

• Kimi K3.1 Pro — 2,78 nghìn tỷ tham số, 2,72 TB trọng số lượng tử hóa U8 trong kho lưu trữ như khi được phát hành, cùng với các tensor BF16 chiếm thêm 57 GB. Không có cấu hình một nút nào mà ở đó mô hình này có thể chỉ là một dự án cuối tuần.

Both vendors ship the software to make serving tractable, and both are unusually good about it. T​encent publishes a vLLM image tag (vllm/vllm-openai:hy4) and an SGLang image (lmsysorg/sglang:hy4) with the tensor-parallel and speculative-decoding flags written out; K​imi's repository ships a compressed-tensors MXFP4 configuration and a 4-bit path that brings the weight file down to the 2.72 TB figure above. Neither of those is a small-model story. The difference is that an 8-GPU node is a purchase most engineering organisations can authorise, and a 2.8-trillion-parameter deployment is a data-centre decision.

Nếu tự vận hành (self-hosting) là lý do bạn quan tâm đến trọng số mở, thì câu đó chính là toàn bộ lập luận, và nó không phụ thuộc vào một bài đánh giá chuẩn.

Generated two-column scoreboard comparing Tencent Hy4 and Kimi K3.1 Pro across six dimensions: Intelligence Index 34.6 versus 46.5, total parameters 770B versus 2.8T, active parameters 49B versus 104B, price $0.834/$2.501 versus $2.00/$10.00 per million tokens, Terminal-Bench 4.0 37.4% versus 67.2%, and cost per index task $1.03 versus $3.68, with a footer reading 'Index figures per Artificial Analysis v5.0.1; parameter counts from vendor model cards.'

Nơi mười hai điểm tọa lạc

Khoảng cách chỉ số 12 điểm nghe có vẻ đồng đều. Không phải vậy — Hy4 đứng ngang ngửa ở một số bài đánh giá và bị đánh bại hoàn toàn ở một bài.

• Agentic coding, Terminal-Bench 4.0 — Kimi K3.1 Pro 67.2%, T​encent Hy4 37.4%. A 30-point gap, and the single biggest contributor to the index difference.

• Agentic science in a terminal, Terminal-Bench-Science — K​imi 34.3%, Hy4 12.9%.

• Software engineering in real repositories, FrontierCode-AA 2.0 — Hy4 31.4%, K​imi 25.5%. Hy4 is the better model here, by six points, and it is the one evaluation where a terminal agent's real-repository work favours T​encent.

• Hard reasoning, HLE-Diamond — K​imi 37.3%, Hy4 32.7%. Closer than the headline suggests.

• Physics, CritPt v2 hard subset — K​imi 49.5%, Hy4 39.0%.

• SaaS workflow execution, AutomationBench-AA — K​imi 73.3%, Hy4 65.6%.

• Agentic knowledge work, AA-Briefcase Elo — K​imi 1,673.6, Hy4 1,445.9. A 228-Elo gap with non-overlapping intervals.

The FrontierCode result is the one worth pausing on, because it contradicts the obvious reading of the other six. On a benchmark of changing real open-source repositories, Hy4 leads. On a benchmark of a clean terminal environment, K​imi leads by 30 points. T​encent's model card explains why that could be: Hy4 was trained specifically against T​encent's own game and frontend pipelines — Unreal, Unity, Godot, UI state management — and reports a 19.1% gain on its internal GameDev suite over Hy4 preview. That is a model tuned for building things, evaluated on a test of repairing them. Take both rows and the honest conclusion is that the coding story is workload-dependent, not that one model codes better.

Screenshot of the Artificial Analysis page for Tencent Hy4, captured 20 November 2026, showing its Intelligence, Performance, Cost and Verbosity rank tiles, 93 tokens per second output, 14.0 minutes per task, a 118.9-second time to first token and a 1M-token context window, with the header still labelling the model proprietary.

Giá thấp hơn 3,6 lần, tính theo mỗi tác vụ đã hoàn thành

Đây là lúc việc so sánh trở thành phép tính thay vì tranh luận. Artificial Analysis báo cáo chi phí đo được cho mỗi tác vụ Intelligence Index của cả hai mô hình, trong đó bao gồm giá token, độ dài suy luận và hành vi bộ nhớ đệm:

• T​encent Hy4 — $1.03 per task, at $0.834 input and $2.501 output per million tokens, 95% cache discount at $0.042.

• Kimi K3.1 Pro — $3,68 mỗi tác vụ, với $2,00 đầu vào và $10,00 đầu ra mỗi triệu token, giảm giá bộ nhớ đệm 90% xuống còn $0,20.

So the 12-point index gap costs 3.6 times as much per task. Per index point, K​imi is roughly 4.4x the price. That is not a scandal — a model that is genuinely better at hard agentic work is supposed to cost more — but it reframes the decision. If your workload needs 67% on Terminal-Bench, there is no substitute and you should pay. If your workload needs 37%, paying three and a half times for the other 30 points is money spent on capability you will not invoke.

There is a second-order cost that the per-task figure hides. K​imi takes 39.7 minutes per index task against Hy4's 14.0, and returns its first answer token after 162.8 seconds against 115.9. At 30 output tokens per second against Hy4's 93, the slowest model in this comparison by a factor of three is also the most expensive. In an agent loop that runs hundreds of steps, latency and cost compound together rather than trading off.

Hai giấy phép với hai cạm bẫy khác nhau

{{1}}Cả hai mô hình đều có trọng số mở theo nghĩa bạn có thể tải xuống và sử dụng chúng. Không mô hình nào là Apache 2.0, và sự khác biệt giữa các điều khoản thương mại của chúng không chỉ là chuyện lý thuyết:{{/1}}

• T​encent Hy4 — the T​encent Hy License 1.0, derived from Apache 2.0. Section 10 requires a separate written agreement before offering the model as a service if your worldwide gross revenue exceeds $50 million in any 12-month period, or if the product carrying it exceeds 100 million monthly active users. Internal use is carved out.

• Kimi K3.1 Pro — Giấy phép Kimi K3.1-Pro. Cùng kiểu hạn chế, với ngưỡng doanh thu 20 triệu USD thay vì 50 triệu USD.

Both carve out end-user products where the model is embedded in specific features rather than exposed as general-purpose model access. Both include mere relaying to a third-party model service as permitted. In plain terms: a small product team building a feature on either model is fine. A company running an inference business on either needs a phone call, and K​imi's phone call comes at less than half the revenue.

Để đầy đủ, thế hệ trước là trường hợp ngoại lệ: Hy4 preview, được phát hành vào ngày 28 tháng 8 năm 2026, dùng Apache 2.0 hoàn toàn không có ngưỡng thương mại nào. Bất kỳ ai đã xây dựng trên giấy phép của bản preview và giờ đang chuyển sang Hy4 đều đang chuyển sang những điều khoản khác.

Chạy cả hai mà chưa chọn cái nào

Lý do khiến việc so sánh này không cần phải phân định trên giấy tờ là cả hai mô hình đều có sẵn từ một endpoint duy nhất với mức giá của chính nhà cung cấp được chuyển thẳng qua: tencent/hy4 ở mức $0,834 và $2,501 cho mỗi triệu token, kimi/kimi-k3.1-pro ở mức $2,00 và $10,00 với giá đọc từ cache là $0,20. Đó chính là những con số ở trên, không bị đội giá thêm, và khi nhà cung cấp thay đổi giá thì thay đổi đó sẽ xuất hiện ở đây ngay trong cùng ngày chứ không phải đợi đến kỳ gia hạn.

For a pair this far apart on capability and cost, the useful pattern is not a split — it is a ceiling. Route to kimi/kimi-k3.1-pro through the routing DSL, set tencent/hy4 as the automatic failover target, and watch how often the failover fires. If it fires rarely, you are paying for K​imi's capability and getting it. If it fires constantly because of K​imi's latency, you have just discovered something a benchmark table cannot tell you, at Hy4's prices rather than K​imi's. Model fusion is the other option: a panel of the two would let the stronger model's reasoning carry the weaker model's cheaper token budget on the evaluations where they converge.

Screenshot of the OrcaRouter model page for Kimi K3.1 Pro, captured 20 November 2026, showing the kimi/kimi-k3.1-pro endpoint with a 1,048,576-token context window, 943,718-token maximum output, text, image and video input, reasoning effort from none to max, a 143-second median time to first token and $2.00/$10.00 per million tokens.

Điều gì sẽ làm thay đổi câu trả lời này?

Three things, in order of likelihood. First, a Hy4 fine-tune: the weights have been public for two days, and the 30-point Terminal-Bench gap is exactly the kind of margin a targeted fine-tune on a company's own terminal traces erodes. Second, an independent evaluation of Kimi K3.1 Pro at a higher reasoning effort than the default max the index uses — the 943,718-token output ceiling in the model's record has not been exercised by anyone publishing results. Third, a Hy4 Flash-class sibling that inherits the agentic training at a quarter of the price, which would make the cost argument against K​imi even harder to answer.

Until one of those lands, the split is clean. Kimi K3.1 Pro is the better model and the more expensive one, by a factor that holds up whether you measure per token, per task or per index point. T​encent Hy4 is the one you can put on your own hardware, at a licence threshold twice as generous and a price a third as steep. Neither of those is a reason to regret the other.

So sánh trong bài viết này2

Phát hiện từ bài viết này · Benchmark: Artificial Analysis · cập nhật hằng ngày