
Qwen 4 vs DeepSeek V4.1 Pro: Two Price Cards, One Identical Cost Per Index Point
- GoogleNEWGoogle: Gemini 4 Carbon2026-11-10$2.00 / $10.00 per 1M tokens · 90 tok/s
- AnthropicNEWAnthropic: Claude Fable 5.22026-11-09$8.00 / $40.00 per 1M tokens · 97 tok/s
- orcaNEWOrca: OrcaC2 1.02026-11-0717 tok/s
- OrcaNEWOrcaCyber: GLM 5.3 Abliterated / Uncensored2026-11-04$3.00 / $5.00 per 1M tokens · 87 tok/s
- OrcaNEWOrcaCyber: Hy4 Abliterated / Uncensored2026-11-04$0.80 / $1.60 per 1M tokens · 133 tok/s
- OrcaNEWOrcaCyber: Kimi K3.1 Pro Abliterated / Uncensored2026-11-04$4.00 / $20.00 per 1M tokens · 72 tok/s
- OrcaOrcaCyber: MiniMax M3.1 Flash Abliterated / Uncensored2026-10-29$0.80 / $1.60 per 1M tokens · 126 tok/s
- OrcaOrcaCyber: GLM 5.3 Flash Abliterated / Uncensored2026-10-27$0.80 / $1.60 per 1M tokens · 65 tok/s
- OrcaOrcaCyber: Qwen3.8 Flash Next Abliterated / Uncensored2026-10-26$0.80 / $1.60 per 1M tokens · 92 tok/s
- OrcaOrcaCyber: MiMo V2.6 Flash Abliterated / Uncensored2026-10-26$0.80 / $1.60 per 1M tokens · 44 tok/s
- MoonshotMoonshotAI: Kimi K3.1 Pro2026-10-2447Intelligence
- OrcaOrcaCyber: DeepSeek V4.1 Flash Abliterated / Uncensored2026-10-23$0.80 / $1.60 per 1M tokens · 193 tok/s
- minimaxMiniMax: M3.1 Flash2026-10-1929Intelligence
- OrcaOrca: OrcaCyber Ultra 1.02026-10-17$5.00 / $10.00 per 1M tokens · 147 tok/s
- deepseekDeepSeek: DeepSeek V4.1 Flash 10172026-10-1733Intelligence
- DeepSeekDeepSeek: DeepSeek V4.1 Flash2026-10-1740Intelligence
- OrcaOrca: OrcaCyber Zero 1.52026-10-10$3.00 / $7.50 per 1M tokens · 123 tok/s
- openaiOpenAI: GPT-6.1 Sol2026-09-2955Intelligence
- anthropicAnthropic: Claude Sonnet 5.52026-09-2855Intelligence
- typesafeTypeSafe: Jev 1.132026-09-24$0.04 / $0.00 per 1M tokens · 219 tok/s
Divide each model's cost per completed task by its Intelligence Index score and something odd happens. Qwen4-Max, at $3.27 per task and 42.9 points, works out to 7.6 cents per index point. DeepSeek V4.1 Pro — or rather the model actually served under DeepSeek's Pro tier, DeepSeek V4 Pro 0813, at $1.77 per task and 23.1 points — works out to 7.7 cents per point. Two companies, two price cards that differ by a factor of four on output, two capability levels nearly twenty points apart, and the same cost per unit of measured intelligence to within one percent. That coincidence is the whole matchup, and it is more useful than any single benchmark row.
A note on the name in the slug: DeepSeek has no model called V4.1 Pro in its catalogue. Its pricing page lists exactly two served models — deepseek-flash, which resolves to DeepSeek-V4.1-Flash-1017, and deepseek-v4-pro, which resolves to DeepSeek-V4-Pro-0813. The V4.1 Pro string survives in a September note about a future launch that has since come off the page. So this is a comparison against DeepSeek's actual Pro model, and every DeepSeek number below is that model's.
The arithmetic first, because it is the argument
Artificial Analysis publishes both the index score and the modelled cost of running the full index suite, using each vendor's list prices and the tokens the model actually consumed. Those two numbers are enough to price capability directly.
• Qwen4-Max — 42.9 index points at xhigh effort; $3.27 per task; 7.6 cents per point.
• DeepSeek V4 Pro 0813 — 23.1 points at max effort; $1.77 per task; 7.7 cents per point.
• The ratio — 1.007. DeepSeek is 46% cheaper per completed task and 46% less capable, and the two facts cancel.
• Against peak pricing — DeepSeek's card doubles inside its 01:00–04:00 and 06:00–10:00 UTC weekday windows, from $0.66/$1.98 to $1.32/$3.96. The $1.77 figure uses the peak rate, so off-peak work pushes DeepSeek's cost per point to roughly 3.8 cents and it becomes the cheaper model per point by a factor of two.
That last line is the actionable one. The two models are equivalent purchases at DeepSeek's list price and Qwen4-Max is twice as efficient if you can schedule into DeepSeek's discount window — which tells you the decision is not about model quality at all, it is about whether your traffic is batchable.

What 23 points buys that 43 does not
Efficiency parity is a neat coincidence; it is not a reason to run a model that scores 23 on a suite where the field median sits in the forties. The gap is not uniform, and its shape is the argument for ever choosing Qwen4-Max.
• Terminal-Bench 4.0 — Qwen4-Max 48.5%, DeepSeek V4 Pro 14.1%. A 34-point spread, the largest single divergence in this comparison.
• FrontierCode 2.0 — 26.5% versus 17.1%. Narrower than the terminal gap but still decisive for repository work.
• HLE Diamond — 44.9% versus 19.5%.
• CritPt Agentic Hard — 43.0% versus 35.0%. The closest of the hard-reasoning suites, and the one place DeepSeek's deficit is arguably recoverable with scaffolding.
• GDPval — 1,808.69 versus no published figure for the DeepSeek model. The absence is worth noting rather than papering over: on economically grounded professional tasks there is no comparable reading, so the case for either model there rests on your own evaluation.
• Capability split — DeepSeek trails on all five sub-scores Artificial Analysis reports, worst in legal (27.5 against Qwen4-Max's 49.6) and closest in strategy and operations (41.1 against 56.9).
If the workload is "read this and extract that", both models clear the bar and the price decides. If the workload is "operate a shell until the tests pass", a 14.1% terminal score means the model fails six runs in seven, and no amount of cheapness makes a failing run inexpensive — you pay for the tokens either way and then pay a human to finish the job.

The column that should decide it for anyone with a review step
Artificial Analysis tracks hallucination separately from accuracy, and the DeepSeek number is the single most disqualifying figure in this matchup: a 94.1% hallucination rate, against 28.4% for Qwen4-Max and roughly 50% for the frontier models in this price band. Its omniscience score is negative (−6.4), meaning it answered less accurately than abstaining would have.
A 94% hallucination rate does not mean 94% of answers are wrong. It means that of the questions the model got wrong or could not verify, almost all were answered with fabricated content rather than declined. For a pipeline with a human in the loop that is a cost multiplier; for one without, it is a liability. Qwen4-Max is not a trustworthy model by frontier standards either, but at 28.4% it at least fails in a shape a reviewer can catch.
One of these is MIT-licensed, and that changes the maths
DeepSeek V4 Pro ships under MIT with weights published; Qwen4-Max is proprietary, hosted only by Alibaba Cloud, and has no downloadable checkpoint. That asymmetry deserves more weight than it usually gets in a price comparison, because it changes what "cost per task" means.
• Marginal cost — DeepSeek's $0.66/$1.98 is a list price for someone else's GPU. Self-hosted, your marginal cost is your own utilisation, which at high steady-state volume is often a third of that and at low volume is worse than the API.
• What you give up — the 1M-token context and the 384K output ceiling DeepSeek documents still apply on your own hardware, but you inherit kernel support, quantisation choices and the evaluation burden of knowing whether your deployment matches the reference.
• What you cannot do with Qwen4-Max — no fine-tuning, no on-premises deployment, no weight inspection, and no ability to keep serving if Alibaba's regional pricing changes. Six regions is broader distribution than most, and it is still one vendor's decision.
The MIT licence is also the honest reason DeepSeek V4 Pro appears on so many hosts while Qwen4-Max appears on one. That is a property of the licence, not a verdict on the model.

Running both without betting on either
These two are a natural pair for a routing layer rather than an either/or decision, because their weaknesses are uncorrelated: DeepSeek is cheap and weak on agentic execution, Qwen4-Max is mid-priced and competent there, and the price difference is small enough that sending the hard 20% of traffic to the more expensive model costs less than the failures it prevents. A routing DSL puts that split in one call — classify by task type, send shell-driven work to one route and extraction work to another — and automatic failover covers the case where either provider degrades.
What we will not claim: Qwen4-Max is not on our catalogue. A qwen4 identifier returns not-found today, its route is Alibaba's Model Studio API and several third-party platforms, and the nearest thing we serve is qwen/qwen3.8-max at $2.00 and $6.00 — the previous flagship, one index generation behind, and $1.50 a million cheaper on output. DeepSeek's side is on our catalogue as deepseek/deepseek-v4-pro-0813 at DeepSeek's own list price with no markup added, so the off-peak and peak rates above are what you are billed, not an approximation of it.
What would change the answer
Three things, in order of likelihood. A DeepSeek V4.1 Pro that actually ships would reset this comparison, because the September note claimed improvements in performance, cost, speed and total task time over V4 Pro — all of it DeepSeek's own claim and none of it reproducible until there is a model ID and a rate card. A Qwen4-Max price cut would break the per-point coincidence in Qwen's favour and make the efficiency argument disappear. And an independent evaluation of either model on tasks you actually run would beat every number on this page, including the ones from Artificial Analysis.
Until then the rule is short. If your work is batchable and document-shaped, DeepSeek V4 Pro at off-peak rates is the cheapest capability on the board and the hallucination rate is the thing you build a check around. If your work runs a shell, opens a repository, or produces something a customer reads without review, pay the extra $1.50 a task and take the 34-point terminal gap.
