A title card headlined 'Qwen4-Max vs Claude Opus 5.5: one ladder has been climbed', with three chips reading 43 as the one measured setting for Qwen4-Max, 59 down to 35 across five settings for Opus 5.5, and eight points as the amount by which Opus 5.5 at low effort sits below Qwen4-Max, captioned to Artificial Analysis Intelligence Index v5.0.1 on 17 November 2026.
Guides & Insights

Qwen4-Max vs Claude Opus 5.5: Only One of These Ladders Has Been Climbed in Public

Author

jinhao.song

Date Published

Latest models · 20View all models →
Benchmarks: Artificial Analysis · updated daily
Back to all posts

Here is the comparison nobody runs. Claude Opus 5.5, generally available since 22 September 2026, scores 59 on Artificial Analysis Intelligence Index v5.0.1 at its maximum effort setting and 35 at its lowest — a 24-point spread across five rungs A​nthropic lets you select. Qwen4-Max, on sale since 16 November 2026, scores 43, and 43 is the only number that exists: Artificial Analysis measured one configuration of it, and A​libaba has published no per-effort breakdown. Set the flagships against each other and you get a 16-point gap and a 3.1× cost gap, which is the article everyone will write this week. Set the ladders against each other and something more useful falls out — Opus 5.5 at low effort lands eight points below Qwen4-Max's default, and Qwen4-Max gives you three rungs to choose from with published numbers for none of them.

The two products, and what each vendor actually put on the card

A two-column scoreboard comparing Qwen4-Max and Claude Opus 5.5 across six rows: index 43 from one setting against 59 at max and 35 at low; three effort levels against five; $1.50 in and $4.50 out against $4.00 and $20.00; $3.27 per task against $10.04; 1,000,000 context on both; video input yes against no. Footer notes the figures are per Artificial Analysis Intelligence Index v5.0.1 and that no independent latency is published for Qwen4-Max.

• Price per million tokens — Claude Opus 5.5 $4.00 in / $20.00 out vs Qwen4-Max $1.50 in / $4.50 out

• Cache — Opus 5.5 reads at $0.20 per million with a 95% discount; Qwen4-Max reads at $0.075, writes at $1.875 for five minutes or $3.00 for the hour

• Context window — 1,000,000 tokens on Opus 5.5 vs 1,000,000 on paper for Qwen4-Max, of which 983,616 are usable as input in thinking mode

• Max output — 128,000 tokens on Opus 5.5 vs 131,072 non-thinking on Qwen4-Max, or 262,144 shared between reasoning and answer in thinking mode

• Reasoning control — five levels (low, medium, high, xhigh, max) vs three (low, high, xhigh), defaulting to high

• Input modalities — text, image and file for Opus 5.5 vs text, image and video for Qwen4-Max

• Openness — both proprietary, no weights published for either

• Independent index score — 59 for Opus 5.5; 43 for Qwen4-Max

Two rows in that list do more work than the rest. The reasoning ladder is the one this article is built on. The modality row is the one that quietly disqualifies a comparison: Qwen4-Max accepts video and Opus 5.5 does not, so any workload built around video input has exactly one candidate here and the benchmarks are beside the point.

A screenshot of the Artificial Analysis model page for Claude Opus 5.5, showing the Anthropic proprietary-model header, the September 2026 release date, the intelligence score panel and the list of providers serving it.

What Opus 5.5's ladder looks like when you climb it

A​nthropic's effort setting is not a quality dial so much as a budget dial, and Artificial Analysis has walked all five positions. Everything below is independent measurement, published on the model's page:

• Max effort — index 59, 24.6 minutes per index task, 352.34 seconds to first answer token, measured at $10.04 per task

• xhigh — index 57, 15.8 minutes per task, 65.52 seconds to first token

• High — index 52, 9.3 minutes per task, 21.64 seconds to first token

• Medium — index 48, 6.8 minutes per task, 12.46 seconds to first token

• Low — index 35, 3.0 minutes per task, 4.80 seconds to first token

The shape is the interesting part. Between high and max you buy seven index points for 15.3 extra minutes per task and a first token that arrives nearly six minutes late. Between medium and high you buy four points for 2.5 minutes. Between low and medium you buy thirteen points — the steepest segment on the ladder, and the one where a team trying to economise is most likely to cut. If your plan is "run Opus 5.5 cheap," low is where that plan lands, and low is a 35: eight points under Qwen4-Max's single published configuration, for a model whose own vendor positions it as the frontier option.

That is not an argument against A​nthropic's ladder. A 35 at three minutes and four seconds to first token is a genuinely different product from a 59 at six minutes to first token, and both are useful. It is an argument against treating "Claude Opus 5.5" and "Qwen4-Max" as two points on a chart. They are two ranges, and only one of them has been mapped.

The 3.1× figure, and why it is narrower than the price gap suggests

The headline cost comparison is easy: at $4.00 and $20.00 per million against $1.50 and $4.50, Opus 5.5 charges 2.67× as much for input and 4.44× as much for output. The measured bill is narrower. Artificial Analysis puts Opus 5.5 at $10.04 per Intelligence Index task against $3.27 for Qwen4-Max — 3.07×, not 4.44×.

The reason is worth understanding, because it survives every model launch: Opus 5.5 is the more verbose of the two, generating 218 million output tokens across the index run against Qwen4-Max's 127 million, and it still narrows the gap rather than widening it. What closes the distance is caching. Opus 5.5 reads cached input at $0.20 per million with a 95% discount applied; Qwen4-Max reads at $0.075, a cheaper rate on a model that spends proportionally more of its bill on fresh input. The rate card and the invoice are different documents, and the invoice is the one that says the gap between these two models is roughly a third, not roughly half.

Which cuts both ways depending on your workload. If your prompts are long, stable and cacheable — a codebase, a document set, a system prompt measured in tens of thousands of tokens — Opus 5.5's cache economics are better than its list price implies. If your prompts are short and different every time, you never reach the cache, and the 4.44× output gap is what you actually pay.

The row where Qwen4-Max is the only option, and the row where it is the only gamble

Video input is a hard partition. Qwen4-Max reads text, images and video; Opus 5.5 reads text, images and files. If the job involves frames — footage review, screen recordings, anything with a timeline — the comparison collapses to one candidate and the 16-point index gap stops mattering.

Speed is the reverse, and it is the honest hole in Qwen4-Max's card. Artificial Analysis lists no time per task, no output rate and no time to first token for the model. A​libaba publishes throughput claims in its launch material — up to 50% fewer tokens than its predecessor on some workloads — but token count is not latency, and a vendor's token-efficiency number tells you nothing about how long a request sits in a queue. For Opus 5.5 you can capacity-plan every rung. For Qwen4-Max you can capacity-plan the token bill and guess at everything else. A team putting either model behind an interactive surface needs the second number, and only one vendor has produced it.

A screenshot of the OrcaRouter model page for anthropic/claude-opus-5.5, showing the flagship badge, the 1M-token context line, the 128K maximum output and the start of the pricing panel.

How to run the comparison without running it twice

The reason this comparison is usually decided on a rate card rather than on traffic is plumbing. Testing a second model means a second contract, a second SDK, and a second set of retry and timeout semantics on a path that already works — so teams read the price, pick one, and move on.

That is the cost OrcaRouter exists to remove, and for this particular pair it removes it unevenly in a way worth being precise about. OrcaRouter routes Claude Opus 5.5 at $4.00 in and $20.00 out — the vendor's list price passed through with 0% markup — through the same key and the same OpenAI-compatible endpoint as GPT-6.1 Sol, Grok 4.5, Qwen3.8-Max and T​encent HY4 Preview. It does not route Qwen4-Max; the catalogue has not picked up the Qwen4 generation yet. So the ladder experiment — Opus 5.5 at five effort levels against your own traffic — is a config change, and the Qwen4-Max side of the comparison is a direct A​libaba key until the catalogue catches up.

The useful consequence is failover. If you do test Qwen4-Max in production, you can keep it as one route beside an incumbent that has five measured rungs and automatic failover across providers, rather than as a replacement for a path you have no fallback for. A model with one published index score and no published latency is exactly the kind of thing to run behind a safety net rather than instead of one.

What would change the answer

Two publications, neither of which exists yet. The first is an Artificial Analysis run of Qwen4-Max at low and xhigh, so the model has a measured range instead of a single point — at which stage this becomes a genuine ladder-against-ladder comparison and the 43 stops being load-bearing. The second is any independent latency number for Qwen4-Max at all. Until both land, the defensible reading is narrow: Opus 5.5 is the choice when you need a rung you can name and measure, and Qwen4-Max is the choice when you need video input or the cheapest fresh input tokens in this pair and can absorb the uncertainty on everything else.

What is not defensible is the shortcut both vendors would prefer — comparing a flagship against a flagship, ignoring that one of them has four more settings, and calling the resulting 16-point gap a verdict.