
Ming-3.0-audio-flash vs Ming-3.0-audio-tiny: Thirteen Times the Parameters, Two and a Half Times the Work
- OrcaNEWOrcaCyber: Hy4 Flash Abliterated / Uncensored2026-11-18$0.07 / $0.28 per 1M tokens · 185 tok/s
- tencentNEWTencent: Hy4 Flash2026-11-16$0.02 / $0.07 per 1M tokens · 228 tok/s
- GoogleNEWGoogle: Gemini 4 Carbon2026-11-10$2.00 / $10.00 per 1M tokens · 89 tok/s
- AnthropicNEWAnthropic: Claude Fable 5.22026-11-09$8.00 / $40.00 per 1M tokens · 98 tok/s
- orcaNEWOrca: OrcaC2 1.02026-11-079 tok/s
- OrcaOrcaCyber: GLM 5.3 Abliterated / Uncensored2026-11-04$3.00 / $5.00 per 1M tokens · 89 tok/s
- OrcaOrcaCyber: Hy4 Abliterated / Uncensored2026-11-04$0.80 / $1.60 per 1M tokens · 134 tok/s
- OrcaOrcaCyber: Kimi K3.1 Pro Abliterated / Uncensored2026-11-04$2.00 / $5.00 per 1M tokens · 79 tok/s
- tencentTencent: Hy42026-11-04$0.83 / $2.50 per 1M tokens · 94 tok/s
- OrcaOrcaCyber: MiniMax M3.1 Flash Abliterated / Uncensored2026-10-29$0.80 / $1.60 per 1M tokens · 118 tok/s
- OrcaOrcaCyber: GLM 5.3 Flash Abliterated / Uncensored2026-10-27$0.80 / $1.60 per 1M tokens · 68 tok/s
- OrcaOrcaCyber: Qwen3.8 Flash Next Abliterated / Uncensored2026-10-26$0.80 / $1.60 per 1M tokens · 94 tok/s
- OrcaOrcaCyber: MiMo V2.6 Flash Abliterated / Uncensored2026-10-26$0.80 / $1.60 per 1M tokens · 44 tok/s
- MoonshotMoonshotAI: Kimi K3.1 Pro2026-10-2447Intelligence
- OrcaOrcaCyber: DeepSeek V4.1 Flash Abliterated / Uncensored2026-10-23$0.80 / $1.60 per 1M tokens · 199 tok/s
- minimaxMiniMax: M3.1 Flash2026-10-1929Intelligence
- OrcaOrca: OrcaCyber Ultra 1.02026-10-17$5.00 / $10.00 per 1M tokens · 113 tok/s
- deepseekDeepSeek: DeepSeek V4.1 Flash 10172026-10-1733Intelligence
- DeepSeekDeepSeek: DeepSeek V4.1 Flash 09102026-10-17$0.15 / $0.60 per 1M tokens · 311 tok/s
- DeepSeekDeepSeek: DeepSeek V4.1 Flash2026-10-1740Intelligence
Ming-3.0-audio-flash and Ming-3.0-audio-tiny arrived on Hugging Face four minutes apart on 3 September 2026 — tiny at 11:45 UTC, flash at 11:49 — and the pair has been mistaken for one another ever since. This morning the confusion became literal. The flash repository was edited at 08:26 UTC with a commit titled "Update Flash BBA score to 99.8% and add the overall #1 leaderboard result"; the tiny repository was edited two minutes and eight seconds later with a commit titled "Update shared Flash BBA score to 99.8%…", carrying the same sentence and the same leaderboard PNG. The tiny model has no Artificial Analysis entry of its own, so if you have seen a 99.8% attributed to Ming-3.0-audio-tiny, that number belonged to its larger sibling and travelled by copy-paste.
That is worth saying first because it frames everything else. These are not two competitors. They are one design at two scales, sharing a tokenizer, a context window, a licence and a serving code path, and differing in a handful of integers inside config.json. The interesting question is not which one wins — the flash wins on every published quality number — but which of those integers you are actually paying for, and what the smaller one is genuinely better at.
What the two repositories actually share
Start with the parts that are identical, because there are more of them than you would expect from a 13.5× parameter gap.
• Architecture name — both declare model_type: bailing_moe_v3_audio, the same custom Transformers code path.
• Tokenizer — both use a vocabulary of 157,184 tokens, with the audio placeholder at index 157,168. A prompt written for one loads on the other.
• Context window — both declare max_position_embeddings: 131072, with the same RoPE theta of 6,000,000 and no scaling applied.
• Routing width — both activate 8 experts per token. This is the number that makes the pair comparable at all.
• Inputs and outputs — audio plus a text instruction in; text, or text with synthesised speech through an optional Talker, out.
• Licence — MIT on both, with the same legal disclaimer file.
• Code — the tiny model's README tells you to git clone the flash model's GitHub repository. There is one implementation, one set of example scripts, one voice guide.
Because the code is shared, the two checkpoints are drop-in interchangeable at the API level. Switching from one to the other is a model-name change, which is exactly the property that makes a two-tier pipeline cheap to build and also the property that makes it easy to publish the wrong model's score.

The four integers that are not shared
Everything that differs lives in text_config, and there are only four numbers that matter.
• Layers — flash 42, tiny 24.
• Experts — flash 512, tiny 128.
• Expert width — flash moe_intermediate_size 768, tiny 512.
• Hidden size — flash 2,560, tiny 1,536.
Multiply those out and you get the headline figures the cards quote: 126B total parameters with 6.5B active for flash, 9.3B total with 2.7B active for tiny. On disk the difference is 259.33 GB of bfloat16 weights in 25 shards against 20.7 GB in two.
Now look at the ratio rather than the absolute numbers, because this is the part the spec sheets bury. Total parameters differ by 13.5×. Weights-on-disk differ by 12.5×. But active parameters differ by only 2.4×. The flash model keeps a much larger library of experts and consults a similar number of them; the tiny model has a smaller library and consults a similar number. So the flash is not thirteen times more expensive per token than the tiny — it is closer to two and a half times, with a memory footprint thirteen times larger sitting mostly idle. That is the classic sparse-MoE trade, and it means the real cost of choosing flash is capacity, not throughput: you are buying a bigger library, and you have to keep the whole library resident whether or not a given clip borrows from it.

One consequence surprises people. Both models declare the same 131,072-token window, and it is tempting to conclude they handle the same audio. They do not. Context is a limit, not a capability, and the vendor's own numbers in the next section show exactly where the smaller model's comprehension gives out well before the window is full.
What the vendor's own tables say
The evaluation images on both cards were produced by inclusionAI and report the two models side by side. These are vendor figures, unaudited, and the task selection is the vendor's; they are still the only per-task comparison that exists, because Artificial Analysis scores only the flash.
• Long-audio chain score — flash 12.31, tiny 10.56.
• LongAudioSpan — flash 41.12, tiny 35.45.
• URO-Bench-Pro — flash 81.92, tiny 54.15.
• VoiceBench — flash 86.74, tiny 74.29.
Two things are worth drawing out. First, the ordering: the tiny loses on every one of them, so nobody should be choosing it expecting parity. Second, and less obvious: the gap is far larger on the audio-reasoning benchmarks (URO-Bench-Pro, down 27.8 points, and VoiceBench, down 12.5) than on the long-audio ones (down 1.75 and 5.67). Whatever the extra experts and layers bought, they bought mostly reasoning over what was heard, not raw endurance over a long recording.
And the flash's own long-audio numbers are weak in absolute terms — a chain score of 12.31 out of whatever that benchmark's scale is, against 34.54 for Qwen3.8-Omni Flash and 49.63 for Gemini 3.8 Flash on the same card. So the honest read of the pair is not "flash is good, tiny is bad". It is that neither checkpoint is a long-recording model, and the tiny is simply weaker still at everything the short-audio benchmarks measure.
The hardware line is drawn by the bytes, not the parameters
This is where the choice usually makes itself, and the two READMEs are unusually specific about the profiles they validated.
• Ming-3.0-audio-flash — reference 128K serving profile at tensor parallelism 4 across 80 GB H800s; long audio can OOM that, with an 8-GPU fallback documented; SGLang validated at four GPUs for text output; SGLang-Omni at --thinker.tp_size 2 on a pair of cards.
• Ming-3.0-audio-tiny — vLLM-Omni with the Thinker on one GPU for text and ASR, or Thinker on GPU 0 and Talker on GPU 1 for speech; SGLang validated on one GPU for text; SGLang-Omni on a single card with --talker.gpu 0.
Read those lines as an infrastructure decision rather than a spec. Flash needs a multi-GPU node and a reason to occupy it. Tiny needs one card, and if you only want transcription or audio question answering, it needs one card with no Talker at all — no speech synthesis stage, no second process, no voice selection. The practical difference between the two is not four times the GPUs; it is whether the thing you are deploying fits on a machine you already have.
There is a second-order effect that shows up in operations. A 25-shard, 259 GB checkpoint has to be pulled to every node that serves it, versioned, and kept warm; the eight-GPU fallback profile means your capacity plan has to tolerate a model that occasionally needs twice the cards for the same traffic. A two-shard, 20.7 GB checkpoint fits in a container image layer, starts in seconds, and can be scaled by adding replicas. For bursty internal tooling, that difference dominates every quality number in this article.

The two-tier pipeline these two checkpoints were built for
Here is the use case the pair actually serves, and it is one neither model card describes: run the tiny model on everything, and the flash model only on what survives.
A cheap first pass with Ming-3.0-audio-tiny can answer "is there speech in this file", "which language is it", "how many speakers", "is the audio clean enough to be worth transcribing" — and it can do it on one card at whatever rate that card sustains. Only the clips that need reasoning, dialect handling or a careful transcription then go to Ming-3.0-audio-flash. Because the tokenizer, prompt format and serving code are shared, the second call is the same request with a different model name; there is no re-encoding, no prompt rewrite, and no second integration to maintain.
The economics are the point. If a fifth of your audio is hard, the flash model sees a fifth of the volume and you can size its node for that fraction rather than for the peak. If almost all of your audio is hard, the cascade buys nothing and you should run flash alone — which is a useful thing to learn from a week of tiny-model triage before you commit to four H800s.
The same shape appears one layer up, in the text calls around the audio models: the classifier that decides which tier a clip belongs to, the structured extraction from a transcript, the summary written afterwards. Those are ordinary chat completions, and OrcaRouter routes them across more than 200 models behind one key at 0% markup, with automatic failover — so the classifier that gates your expensive audio tier does not become the component that takes the pipeline down. The routing DSL is the piece that makes the tier decision expressible as configuration rather than code: send short clean clips one way, long or accented ones another, and let a fallback model cover the gap when a provider degrades. We do not serve either Ming checkpoint; both are downloads you run yourself.
How to settle it with your own audio
Both checkpoints are MIT, both fit the same code path, and both are small enough in the tiny case to test without a procurement conversation. That makes an afternoon of measurement more informative than any of the numbers above.
Pull two hundred clips from your own traffic, weighted toward the hard end — accented speech, overlapping speakers, background noise, the long recordings you actually have. Run both models with the same prompts, and score three things: transcription accuracy on the clips you have ground truth for, whether the language label was right, and how often the output was unusable rather than merely wrong. Then run the cascade and measure how many clips the tiny model handled well enough that the flash model was never needed.
That last number is the only one that decides the infrastructure. If it comes back high, you have a one-GPU deployment with a big model behind it for the tail. If it comes back low, you have learned that your workload is the workload the flash model was built for, and the tiny was a useful experiment rather than a tier. Either answer is cheap. Guessing from a parameter count is not, because the 13.5× on the card and the 2.4× in the compute budget point at completely different hardware, and only your recordings can tell you which one you are buying.
