بطاقة عنوان مُولّدة نصها «Qwen 4 vs DeepSeek V4.1 Pro: بطاقتا سعر، وتكلفة واحدة متطابقة لكل نقطة مؤشر»، مع عنوان فرعي «7.6 سنتات و7.7 سنتات لكل نقطة مؤشر، من مهمة بتكلفة $3.27 ومهمة بتكلفة $1.77». ثلاثة صفوف مرقمة نصها «درجة المؤشر 42.9 مقابل 23.1، Artificial Analysis v5.0.1»، و«تكلفة كل مهمة مؤشر مكتملة $3.27 مقابل $1.77» و«طراز DeepSeek Pro الذي يُطرح فعليًا هو V4 Pro 0813». تذييل نصه «الدرجات والتكلفة لكل مهمة وفق Artificial Analysis Intelligence Index v5.0.1؛ والأسعار وفق قائمة الأسعار المنشورة لكل مورّد». تصميم متجهي مسطح على خلفية بيضاء بلمسات أزرق وسماوي، وعلامة OrcaRouter مركّبة في أسفل اليمين.
Guides & Insights

Qwen 4 مقابل DeepSeek V4.1 Pro: بطاقتا أسعار، وتكلفة متطابقة لكل نقطة مؤشر

الكاتب

jinhao.song

تاريخ النشر

أحدث النماذج · 20عرض جميع النماذج →
المعايير: Artificial Analysis · يُحدَّث يوميًا
العودة إلى جميع المقالات

Divide each model's cost per completed task by its Intelligence Index score and something odd happens. Qwen4-Max, at $3.27 per task and 42.9 points, works out to 7.6 cents per index point. D​eepSeek V4.1 Pro — or rather the model actually served under D​eepSeek's Pro tier, DeepSeek V4 Pro 0813, at $1.77 per task and 23.1 points — works out to 7.7 cents per point. Two companies, two price cards that differ by a factor of four on output, two capability levels nearly twenty points apart, and the same cost per unit of measured intelligence to within one percent. That coincidence is the whole matchup, and it is more useful than any single benchmark row.

A note on the name in the slug: D​eepSeek has no model called V4.1 Pro in its catalogue. Its pricing page lists exactly two served models — deepseek-flash, which resolves to DeepSeek-V4.1-Flash-1017, and deepseek-v4-pro, which resolves to DeepSeek-V4-Pro-0813. The V4.1 Pro string survives in a September note about a future launch that has since come off the page. So this is a comparison against D​eepSeek's actual Pro model, and every D​eepSeek number below is that model's.

الحساب أولًا، لأنه هو الحجة.

تنشر Artificial Analysis درجة المؤشر والتكلفة المُنمذجة لتشغيل مجموعة المؤشرات الكاملة، باستخدام أسعار القائمة لدى كل مورّد والرموز التي استهلكها النموذج فعليًا. هذان الرقمان كافيان لتسعير القدرة مباشرةً.

• Qwen4-Max — 42.9 نقطة مؤشر عند جهد xhigh؛ 3.27 دولار لكل مهمة؛ 7.6 سنت لكل نقطة.

• DeepSeek V4 Pro 0813 — 23.1 نقطة عند أقصى جهد؛ 1.77 دولار لكل مهمة؛ 7.7 سنت لكل نقطة.

• The ratio — 1.007. D​eepSeek is 46% cheaper per completed task and 46% less capable, and the two facts cancel.

• Against peak pricing — D​eepSeek's card doubles inside its 01:00–04:00 and 06:00–10:00 UTC weekday windows, from $0.66/$1.98 to $1.32/$3.96. The $1.77 figure uses the peak rate, so off-peak work pushes D​eepSeek's cost per point to roughly 3.8 cents and it becomes the cheaper model per point by a factor of two.

That last line is the actionable one. The two models are equivalent purchases at D​eepSeek's list price and Qwen4-Max is twice as efficient if you can schedule into D​eepSeek's discount window — which tells you the decision is not about model quality at all, it is about whether your traffic is batchable.

A generated two-column scoreboard titled 'Qwen4-Max vs DeepSeek V4 Pro 0813 - the scoreboard'. The Qwen4-Max column reads index score 42.9, cost per index task $3.27, cents per index point 7.6, input per million $1.50, output per million $4.50, hallucination rate 28.4%. The DeepSeek column reads index score 23.1, cost per index task $1.77, cents per index point 7.7, input per million $1.32 at peak, output per million $3.96 at peak, hallucination rate 94.1%. A footer reads 'Scores and per-task cost per Artificial Analysis Intelligence Index v5.0.1; prices per each vendor's published rate card.' The OrcaRouter mark is composited bottom right.

ما الذي تشتريه 23 نقطة ولا تشتريه 43؟

تكافؤ الكفاءة مجرد مصادفة أنيقة؛ وليس سببًا لتشغيل نموذج يحقق 23 في مجموعة اختبارات يقع فيها وسيط المجال في الأربعينات. الفجوة ليست موحّدة، وشكلها هو الحجة لاختيار Qwen4-Max على الإطلاق.

• Terminal-Bench 4.0 — Qwen4-Max 48.5%، DeepSeek V4 Pro 14.1%. فارق قدره 34 نقطة، وهو أكبر تباين فردي في هذه المقارنة.

• FrontierCode 2.0 — 26.5% مقابل 17.1%. أضيق من الفجوة الطرفية لكنه لا يزال حاسمًا لعمل المستودعات.

• HLE Diamond — 44.9% مقابل 19.5%.

• CritPt Agentic Hard — 43.0% versus 35.0%. The closest of the hard-reasoning suites, and the one place D​eepSeek's deficit is arguably recoverable with scaffolding.

• GDPval — 1,808.69 versus no published figure for the D​eepSeek model. The absence is worth noting rather than papering over: on economically grounded professional tasks there is no comparable reading, so the case for either model there rests on your own evaluation.

• Capability split — D​eepSeek trails on all five sub-scores Artificial Analysis reports, worst in legal (27.5 against Qwen4-Max's 49.6) and closest in strategy and operations (41.1 against 56.9).

إذا كان عبء العمل هو "اقرأ هذا واستخرج ذاك"، فإن كلا النموذجين يتجاوزان الحد المطلوب ويتحدد الأمر بالسعر. أما إذا كان عبء العمل هو "شغّل صدفة حتى تنجح الاختبارات"، فإن درجة طرفية قدرها 14.1% تعني أن النموذج يفشل في ست من كل سبع محاولات، ولا تجعل أي درجة من الرخص المحاولة الفاشلة غير مكلفة — فأنت تدفع ثمن الرموز في كل الأحوال ثم تدفع لإنسان لإنجاز المهمة.

A headless-browser screenshot of the Artificial Analysis page for DeepSeek V4 Pro 0813, captured 17 November 2026 in English, showing DeepSeek's mark, the label Open weights model, Released August 2026, an intelligence rank, a performance rank, a speed reading of 93 output tokens per second, an index score of 23, the summary describing the model as below average in intelligence for its size, text-only input, text output and a 1M-token context window.

العمود الذي ينبغي أن يحسم الأمر لكل من لديه خطوة مراجعة

Artificial Analysis tracks hallucination separately from accuracy, and the D​eepSeek number is the single most disqualifying figure in this matchup: a 94.1% hallucination rate, against 28.4% for Qwen4-Max and roughly 50% for the frontier models in this price band. Its omniscience score is negative (−6.4), meaning it answered less accurately than abstaining would have.

معدل هلوسة بنسبة 94% لا يعني أن 94% من الإجابات خاطئة. بل يعني أنه من بين الأسئلة التي أخطأ فيها النموذج أو لم يستطع التحقق منها، جرى الرد على جميعها تقريبًا بمحتوى ملفّق بدلًا من رفض الإجابة. وبالنسبة إلى خط أنابيب فيه إنسان في الحلقة، فإن هذا مضاعف للتكلفة؛ أما في خط أنابيب بلا إنسان في الحلقة، فهو عبء مسؤولية. Qwen4-Max ليس نموذجًا موثوقًا بمعايير النماذج الرائدة أيضًا، لكن عند 28.4% فإنه على الأقل يفشل بطريقة يمكن للمراجع اكتشافها.

أحد هذه مرخّص بموجب MIT، وهذا يغيّر الحسابات

DeepSeek V4 Pro ships under MIT with weights published; Qwen4-Max is proprietary, hosted only by A​libaba Cloud, and has no downloadable checkpoint. That asymmetry deserves more weight than it usually gets in a price comparison, because it changes what "cost per task" means.

• Marginal cost — D​eepSeek's $0.66/$1.98 is a list price for someone else's GPU. Self-hosted, your marginal cost is your own utilisation, which at high steady-state volume is often a third of that and at low volume is worse than the API.

• What you give up — the 1M-token context and the 384K output ceiling D​eepSeek documents still apply on your own hardware, but you inherit kernel support, quantisation choices and the evaluation burden of knowing whether your deployment matches the reference.

• What you cannot do with Qwen4-Max — no fine-tuning, no on-premises deployment, no weight inspection, and no ability to keep serving if A​libaba's regional pricing changes. Six regions is broader distribution than most, and it is still one vendor's decision.

ترخيص MIT هو أيضاً السبب الصادق وراء ظهور DeepSeek V4 Pro على هذا العدد الكبير من المضيفين بينما يظهر Qwen4-Max على مضيف واحد. ذلك سمة من سمات الترخيص، وليس حكماً على النموذج.

A headless-browser screenshot of the OrcaRouter model page for DeepSeek V4 Pro 0813, captured 17 November 2026 in English, showing the identifier deepseek/deepseek-v4-pro-0813, an off-peak input price of $0.66, the byline DeepSeek dated 2026-08-12, and the description noting a 1M-token context, up to 384K output tokens, thinking and non-thinking modes with low, high and max effort, JSON output and tool calls.

تشغيل كليهما دون تبديل

These two are a natural pair for a routing layer rather than an either/or decision, because their weaknesses are uncorrelated: D​eepSeek is cheap and weak on agentic execution, Qwen4-Max is mid-priced and competent there, and the price difference is small enough that sending the hard 20% of traffic to the more expensive model costs less than the failures it prevents. A routing DSL puts that split in one call — classify by task type, send shell-driven work to one route and extraction work to another — and automatic failover covers the case where either provider degrades.

What we will not claim: Qwen4-Max is not on our catalogue. A qwen4 identifier returns not-found today, its route is A​libaba's Model Studio API and several third-party platforms, and the nearest thing we serve is qwen/qwen3.8-max at $2.00 and $6.00 — the previous flagship, one index generation behind, and $1.50 a million cheaper on output. DeepSeek's side is on our catalogue as deepseek/deepseek-v4-pro-0813 at DeepSeek's own list price with no markup added, so the off-peak and peak rates above are what you are billed, not an approximation of it.

ما الذي سيغيّر الإجابة؟

Three things, in order of likelihood. A D​eepSeek V4.1 Pro that actually ships would reset this comparison, because the September note claimed improvements in performance, cost, speed and total task time over V4 Pro — all of it D​eepSeek's own claim and none of it reproducible until there is a model ID and a rate card. A Qwen4-Max price cut would break the per-point coincidence in Q​wen's favour and make the efficiency argument disappear. And an independent evaluation of either model on tasks you actually run would beat every number on this page, including the ones from Artificial Analysis.

حتى ذلك الحين، القاعدة قصيرة. إذا كان عملك قابلاً للمعالجة على دفعات وذا طبيعة مستندية، فإن DeepSeek V4 Pro بأسعار خارج أوقات الذروة هو أرخص قدرة متاحة في القائمة، ومعدل الهلوسة هو ما تبني حوله فحصًا. وإذا كان عملك يشغّل صدفة، أو يفتح مستودعًا، أو ينتج شيئًا يقرأه العميل دون مراجعة، فادفع 1.50 دولار إضافية لكل مهمة، واقبل فجوة الطرفية البالغة 34 نقطة.